A&D Weighing Indicator AD-4407 Dokumentacja Strona 17
- Strona / 66
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
AD-4407 Weighing Indicator Page 15
5.2.3. Zero Calibration
Procedure
Step 8 Check the Cal 0 display.
Select a zero calibration method to adjust the zero point
Weighing input
(Normal way)
The adjustment method
with nothing on the
weighing unit.
To step 9
Digital input
The numerical way to
input a load cell output
voltage.
To step 10
Weighing Input
Step 9 Place nothing on the weighing unit. Press the ENTER
key after the STABLE mark has turned ON. The new
zero point parameter will be stored. Proceed to step11.
ESC key .......... The key not to change the zero point
data and proceed to the next step.
Caution Do not press the ENTER key while the STABLE
mark is off (detecting motion). Arrange the
condition using the F00 filter function.
Digital Input
Step10 Pressing the +/- key, a stored input voltage parameter
of the zero point is displayed in the unit of mV/V. Adjust
the input voltage using the 0 - 9 keys.
ENTER....... The key to store the zero point parameter
and proceed to the next step.
ESC key..... The key to proceed to the next step without
changing the parameter.
5.2.4. Span Calibration
Step11 Check the capacity display after Cal f is displayed for 2 seconds.
Select a span calibration method to adjust the capacity.
Weighing a mass less than the
maximum capacity
The method to weigh a mass less
than the maximum capacity.
To step 12
Weighing maximum capacity
mass
The method to weigh a mass
equivalent to the maximum capacity.
To step 14
Digital input
The numerical way to enter a load
cell output voltage.
To step 16
5.2. Calibration Procedure
Zero calibration
Place nothin
g
on
the weighing unit
(No load)
Turn on STABLE mark
Stored input voltage
New input voltage
mV/V
mV/V
To S
p
an Calibration
+/
+/+/
+/
-
--
-
NET
/
GROS
S
PRINT
ENTER
PRINT
ENTER
9
0
- Weighing Indicator 1
- This manual and Marks 2
- Contents 3
- 1. Compliance 5
- Standard connection 7
- AD-4407 Weighing Indicator 12
- ESC key is 12
- 5. Calibration 13
- ON/OFF key 14
- CAL key 14
- 5.2.3. Zero Calibration 17
- 5.2.4. Span Calibration 17
- Turn display off 18
- 0kg 50kg 100kg Gross 19
- MODE key to display lnr 0 20
- ESC key to finish this 20
- ZERO key and TARE key are 25
- 0 - 9 keys 26
- ZERO key to select switch 26
- 0, 1 key to select 26
- ZERO key 27
- 0 , 1 keys 27
- [Type2] 28
- [Type3] 29
- 6.2. F-Functions 31
- 6.3. CF-Functions 32
- 7. Tare 33
- M+ key to accumulate 34
- 8. Accumulation 35
- 9.1.1. Using Code Memory 37
- 10.1. Weight Check Mode 39
- 10.2.2. Simple Batch 42
- 10.2. Setpoint Comparison 43
- 11. Hold Function 45
- 12. Counting Function 47
- 13. RS-232C Interface 48
- 48
- 13.2. Data Format 49
- 13.3. Command Format 51
- Relay specifications 59
- 0 - 9 key. By 60
- Cf06=0,1 Cf06=2 62
- Cf07=0 Cf07=1 62
- 18. Specifications 63
Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola A&D Weighing Indicator AD-4407
(24 strony)
TOA Electronics LG LX290 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Navigatoren TOA Electronics LG LX290.
Wir stellen 1 PDF-Handbücher TOA Electronics LG LX290 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentarze do niniejszej Instrukcji